User's Manual

DJI Flight Simulator User Manual
©
2020 DJI All Rights Reserved.
13
Training Modules
This section introduces all the modules and their corresponding modes and levels. More actions are
available in some specic scenarios or with specic aircraft. Refer to the Additional Functions section for
details.
Skills Training Module
Select Skills Training in the Main Screen, and then select an aircraft to select a training. Skills Training
includes Tutorials, Hovering Test, Fly Track Test, UTC Pylon Inspection Test Process, and DJI Internal
Aircraft Skill Test Process. See details below.
Tutorials
Learn the basics of piloting an aircraft.
There are three levels: Basic Flight Skills, Shooting Skills, and Flight Mode.
Hovering Test
The hovering test provides a series of virtual testing conditions to assist you in testing and improving the
hovering skills.
There are seven levels: Single Target, Multiple Targets, Fixed Orientation Hovering, Four Directions
Hovering, Single Target with Wind, Multiple Targets with Wind, and Four Directions Hovering with Wind.
The diculty gradually increases with each level, also incorporating the eect of wind.
Fly Track Test
This test is to check your control skills over the aircraft. You will be required to y along the designated
route in A-mode.
There are eight levels: Square Track(Overhead View), Square Track, Rectangle Track(Overhead View),
Rectangle Track, Ring Track(Overhead View), Ring Track, Double Ring Track(Overhead View), and
Double Ring Track. The diculty gradually increases with each level.
The system will display the aircraft’s actual ight route and compare it with the pre-set, standard ight
route to calculate a score. In this exercise, users have to overcome parallax, which also exists in real
ight.
UTC Pylon Inspection Test Process
A series of scenarios designed for UTC pylon inspection test.
There are six levels: Preparation, Route Test, Hovering Test, Multi-dimensional Operation Test, BVR
Operation Test, and End of Operation.
DJI Internal Aircraft Skill Test Process
A series of scenarios designed for DJI internal aircraft skill test.
There are ve levels: Preparation, Takeo and Landing Test, Rectangle Track Test, Ring Track Test, Hovering
Test, and End of Operation.