User's Manual

Mavic 2 Enterprise Series User Manual
52
©
2019 DJI All Rights Reserved.
position. When the POI function is enabled, the drone yaw can be set to center to POI so that the
aircraft nose points at the POI during the mission. Tap this icon again to disable the POI function.
2. ReversePath
S
E
: Tap it to swap the start and end points to reverse the ight path. “S” refers to the start
point.
3 ClearWaypoints
: Tap to clear all the added waypoints.
4. DeleteSelectedWaypoint
: Tap to delete the selected waypoint.
5. Location
: Tap to center the map around the aircraft’s location.
6. MapLock
: Map rotation is locked by default. North is at the top. Tap the button to unlock rotation.
Then users can adjust the map orientation by tapping and rotating two ngers on the map.
7. MapMode
: Tap to switch between Standard and Satellite mode.
8. ClearScreen
: Tap to clear the ight path currently shown on the map.
9. ParameterList
Edit the mission name and congure Route and Waypoints settings in the list.
Route
The settings are applied to the entire route, including aircraft speed, height, yaw, gimbal
control, and completion action.
Drone Yaw:
a. Along the route: The aircraft’s nose is always aligned to the direction of the next two
waypoints.
b. Manual: Users manually control the aircraft heading using the control sticks.
c. Set Each Waypoint: Set aircraft heading at each waypoint in “Waypoints” settings.
d. Center to POI: This option will be displayed when a POI is added. The aircraft’s now is
always pointing at the POI.
Gimbal Control:
a. Manual: Users manually control the gimbal angle through the gimbal dial.
b. Set Each Waypoint: Set gimbal pitch angle at each waypoint in “Waypoints” settings.
Waypoints
The settings are applied to the selected waypoint, including aircraft height, yaw, rotation,
gimbal pitch, and waypoint actions.
Select a waypoint and then set waypoint parameters. Tap “<” or “>” to switch to the previous or
next waypoint.
Height:
a. Follow Route: The aircraft height will be set according to “Route” settings.
b. Dened: Input a custom height value.
Drone Yaw, Aircraft Rotation: These two options will be available to set the aircraft heading at
the selected waypoint and the aircraft rotation direction when ying to the next waypoint if “Set
Each Waypoint” is set for “Drone Yaw” in “Route” settings.