User's Manual

Mavic 2 Enterprise Series User Manual
©
2019 DJI All Rights Reserved.
49
the interference will not aect operation and overall ight experience.
10. FFC Calibration
Tap this button to enable FCC calibration in IR or MSX Mode. Calibration is used to optimize image quality.
During calibration, your screen may freeze momentarily.
11. HD Video Link Signal Strength
: This icon shows the strength of the HD video downlink connection between the aircraft and the
remote controller. The icon will blink when an interference is recognized during ight. When there are no
additional warnings in DJI Pilot, it means that the interference will not aect operation and overall ight
experience.
12. Temperature measurement
: Tap to enable/disable the temperature measurement. Spot meter and Area measurement are
available when using IR or MSX modes.
Spot Meter: The temperature of any position in an image can be measured with an accuracy of ±10%
in Low Gain Mode, and an accuracy of ±5% in High Gain Mode.
Area Measurement: Enabling this function will display the average temperature, lowest temperature,
highest temperature, and the corresponding locations of each area.
The temperature measurement accuracy is aected by various factors:
1) Reectivity of objects - shiny metals with high reectivity will reect more of the background radiation
and result in lower accuracy, whereas objects with matte surfaces will produce a higher accuracy.
2) Temperature of background radiation - a sunny day without clouds will have less of an eect on the
accuracy than a cloudy day.
3) Air temperature and humidity - as temperature and humidity increases, accuracy decreases.
4) Distance between camera and object - as distance decreases, accuracy increases.
5) Emissivity of objects – emissivity and accuracy increase together.
13. Battery Settings
61%
: Shows the current battery level. Tap to view the battery information menu, set the various battery
warning thresholds, and view the battery warning history.
14. MSX adjustment
: When MSX Mode is selected, adjust the accuracy of the MSX footage using MSX adjustment.
15. General Settings
: Tap to enter the General Settings menu to set units of measurement, enable/disable livestream and
more.
16. Display Mode
Tap to switch between the Visible, IR, and MSX display modes.
Visible mode: Only displays the footage that visual camera captures.
IR mode: Only displays the footage that infrared thermal camera captures.
MSX mode: Combines the infrared and visual footage.
17. Camera Settings
Tap to enter the photo and video settings. Tap to congure photo settings such as photo mode and
image format. Tap to congure video settings such as video size and format. Tap to congure video
caption, grid and smart LED, ROI, temperature alert, gain modes settings and more.