User's Manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Flight Modes
- Aircraft LEDs and Status Indicator
- Return to Home
- Vision Systems and Infrared Sensing Systems
- Advanced Pilot Assistance Systems (Only Mavic 2 Enterprise is supported)
- Flight Recorder
- Password Protection
- Attaching and Detaching the Propellers
- Intelligent Flight Battery
- Gimbal and Camera
- DJI AirSense
- Modular Accessories
- Remote Controller
- DJI Pilot App
- Flight
- Appendix
Mavic 2 Enterprise Series User Manual
©
2019 DJI All Rights Reserved.
37
Controlling the Camera
1. Use the Record button to start/stop recording.
2. Use the Focus/Shutter Button to auto focus and take photos.
3. Use the Zoom Adjustment Dial to zoom in/out. (Mavic 2 Enterprise)
Use the EV Adjustment Dial to adjust the exposure value. (Mavic 2 Enterprise Dual)
Charging the Battery
Connect the provided AC power adapter to the power port on the remote controller. It takes
approximately 2 hours and 15 minutes to charge the remote controller battery fully. Remove the RC
cable from the remote controller before charging.
1
3
2
AC Power Adapter
Power Outlet
USB Adapter