User's Manual

36
©
2019 DJI All Rights Reserved.
Remote Controller
Built into the remote controller is DJI’s long-range transmission technology OcuSync 2.0, offering a
maximum transmission range of 6.2 mi (10 km) and displaying video from the aircraft to DJI Pilot on
your mobile device at up to 1080p. Easily control the aircraft and camera using the onboard buttons.
An onboard LCD screen gives real-time aircraft data information and the detachable control sticks make
the remote controller easier to store.
In a wide-open area with no electromagnetic interference, OcuSync 2.0 smoothly transmits video links
at up to 1080p, no matter how the ight attitude is changed. The remote controller works at both 2.4
GHz and 5.8 GHz, automatically selecting the best transmission channel. OcuSync 2.0 reduces the
latency to 120-130 ms by improving the camera performance through the video decoding algorithm and
the wireless link.
By pressing the Focus/Shutter Button halfway, auto Focus is supported during shooting even in low
light conditions. The Mavic 2 Enterprise supports zoom in/out by using the Zoom Adjustment Dial and
the Mavic 2 Enterprise Dual supports exposure adjustment by using the EV Adjustment Dial.
The built-in battery has a capacity of 3950 mAh and a maximum run time of 2 hours and 15 minutes.
The remote controller charges the mobile device with a charging ability of 500 mA@5V. The remote
controller automatically charges Android devices. For iOS devices, rst be sure that charging is enabled
in DJI Pilot. Charging for iOS devices is disabled by default and needs to be enabled each time the
remote controller is powered on.
Using the Remote Controller
Press the Power button to display the current battery level on the LCD screen. Press once, then again,
and hold to turn the remote controller on or o.