User's Manual

Mavic 2 Enterprise Series User Manual
32
©
2019 DJI All Rights Reserved.
DJI AirSense
Manned aircraft with an ADS-B transceiver will actively broadcast ight information including location,
flight path, speed, and altitude. DJI AirSense receives this by ADS-B transceivers via an on-board
receiver or internet connection. UAVs installed DJI AirSense can obtain the position, orientation and
velocity information from the manned airplane built-in ADS-B transmitter (1090 ES and UAT standard
supported), calculate the collision risk level real time and send the warning to user. The system will
analyze the potential risk of collision by comparing the location of a manned aircraft, sending timely
warnings to pilots via the DJI Pilot app.
DJI AirSense provides users with information about nearby manned aircraft to ensure ight safety. The
system doesn’t actively control the drone to avoid incoming aircraft. Always y your aircraft within a
visual line of sight and be cautious at all times. Lower your altitude when you receive warnings. Please
be aware that DJI AirSense has the following limitations:
1. It can only receive messages sent by manned aircraft installed with an ADS-B out device and in
accordance with 1090ES (RTCA DO-260) or UAT (RTCA Do-282) standards. DJI devices will not
receive related broadcast messages or send out warnings for manned aircraft without ADS-B outs
or with malfunctioning ADS-B outs.
2. If there is an obstacle or steel structure between civil and DJI aircraft, the system won’t be able
to receive ADS-B messages sent by manned aircraft or send out warnings. Keenly observe your
surroundings and y with caution.
3. Warnings may be sent with delay when the DJI AirSense is interfered by the surrounding. Keenly
observe your surroundings and y with caution.
4. Warnings are not sent when a DJI aircraft is unable to determine its location.
5. It cannot receive ADS-B messages sent by manned aircraft or send out warnings when disabled or
miscongured.
On the precondition that connection between a DJI aircraft and the pilot remote controller is stable,
when the system conrms the possibility of a collision, it will send a series of warnings based on the
distance between drone and manned aircraft. We recommended that the operator descend altitude
immediately after the rst warning to avoid a collision, choosing another ight path where necessary.
Video Edit
Mavic 2 Enterprise supports MP4 and MOV video formats, providing H.264 code formats.
Mavic 2 Enterprise Dual supports MP4 and MOV video formats, providing H.264 code formats, and
supports capturing of visible light, thermal imaging, or a combination of them.
The software below has been tested by DJI and is recommended for playing or editing videos.
Software Mac Version Win Version
Adobe Premier Pro CC 2018 v12.1.1 (10) v12.1.1 (10)
Davinci Resolve v15.0 free v14.3 Studio
Apple Final Cut Pro X v10.4.3 N/A
Apple QuickTime v10.4 (928.5.1) N/A
Apple iMovie v10.4.2 N/A
VLC Player v3.0.2 v3.0.2