User's Manual
Table Of Contents
- Using This Manual
- Product Profile
- Aircraft
- Flight Modes
- Aircraft LEDs and Status Indicator
- Return to Home
- Vision Systems and Infrared Sensing Systems
- Advanced Pilot Assistance Systems (Only Mavic 2 Enterprise is supported)
- Flight Recorder
- Password Protection
- Attaching and Detaching the Propellers
- Intelligent Flight Battery
- Gimbal and Camera
- DJI AirSense
- Modular Accessories
- Remote Controller
- DJI Pilot App
- Flight
- Appendix
Mavic 2 Enterprise Series User Manual
26
©
2019 DJI All Rights Reserved.
Detaching the Propellers
Press the propellers down onto the motors and rotate them in the unlock direction.
Propeller blades are sharp. Handle with care.
Only use original DJI propellers. Do not mix propeller types.
Ensure that all propellers are in good condition before each flight. Do not use aged, chipped, or
broken propellers.
Ensure that the propellers and motors are installed securely before each flight.
To avoid injury, stand clear of and do not touch propellers or motors when they are spinning.
To avoid damaging the propellers, place the aircraft in the direction shown in the carrying
case during transportation or storage. Do not squeeze or bend the propellers. If propellers are
damaged, the flight performance is affected.
Ensure the motors are mounted securely and rotating smoothly. Land the aircraft immediately if
a motor is stuck and unable to rotate freely.
Keep the motors free of dust.
DO NOT attempt to modify the structure of the motors.
DO NOT touch or let your hands or body come in contact with the motors after flight as they
may be hot.
DO NOT block any of the ventilation holes on the motors or the body of the aircraft.
Ensure the ESCs sound normal when powered on.
Intelligent Flight Battery
The Mavic 2 Intelligent Flight Battery is a 15.4 V, 3850 mAh battery with smart charging/discharging
functionality. Only use a DJI approved AC power adapter to charge the battery.
Intelligent Flight Battery AC Power Adapter
Battery Features
1. Battery Level Display: The LED indicators display the current battery level.
2. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to less than
60% of the maximum battery level when it is idle for more than 10 days. It takes approximately three
to four days to discharge the battery to 65%. It is normal to feel moderate heat being emitted from
the battery during the discharging process.
3. Balanced Charging: During charging, the voltages of the battery cells are automatically balanced.
4. Overcharge Protection: The battery stops charging automatically once fully charged.
5. Temperature Detection: The battery only charges when the temperature is between 41° and 104° F (5°
and 40° C).