User Manual
©
2019 DJI All Rights Reserved.
47
MATRICE 200
SERIES V2 User Manual
Mounting the Control Stick Covers
1. Remove the rings around the sticks with the Control Stick Cover Mounting Key, and the screws
on the top of the sticks.
2. Mount the Control Stick Covers to the remote controller and secure them with the Control Stick
Cover Mounting Key.
3. Reattach the screws to the sticks.
The two Control Stick Covers are not the same, and neither are the two rings around the
sticks. The left and right Control Stick Covers and rings can be distinguished using the
gures below. Be sure to install each Control Stick Cover on the correct side.