User Manual

©
2019 DJI All Rights Reserved.
39
MATRICE 200 SERIES V2 User Manual
Mounting the Monitor to the Remote Controller
Mounting the DJI CrystalSky Monitor
Ensure that Part B is
unlocked. Connect Part
B to Part A.
Lock the Mounting Bracket.
Use a coin or the
screwdriver included to
adjust the tightness of
the tilt axis.
Mounting the Other Mobile Devices
For other mobile devices (e.g. iPhones, iPads), the Cendence Mobile Device Holder and an
appropriate USB cable are required.
Lock the Mounting Bracket, and
connect your mobile device.
Unlock the Mounting Bracket and
mount the Mobile Device Holder.
Attach your mobile device, then tighten the clamp to secure it. Connect your mobile device to the
remote controller with a USB cable. Plug one end of the cable into your mobile device, and the
other end into the USB port on the back of the remote controller.
A
B