Owner's Manual
Table Of Contents
- User Manual
- Using This Manual
- Product Profile
- Aircraft
- Flight Modes
- Aircraft LEDs and Status Indicator
- Return to Home
- Vision Systems and Infrared Sensing Systems
- Advanced Pilot Assistance Systems (Only Mavic 2 Enterprise is supported)
- Flight Recorder
- Password Protection
- Attaching and Detaching the Propellers
- Intelligent Flight Battery
- Gimbal and Camera
- DJI AirSense
- Modular Accessories
- Remote Controller
- DJI Pilot App
- Flight
- Appendix
- In the Box
- Quick Start Guide
- Mavic 2 Enterprise Series Release Notes
- Intelligent Flight Battery Safety Guidelines
- Disclaimer & Safety Guidelines
- Warranty Period of Main Parts
Mavic 2 Enterprise Series User Manual
©
2019 DJI All Rights Reserved.
45
3. Battery Level Indicator Bar
: The battery level indicator provides a dynamic display of the battery level. The colored zones on
the battery level indicator represent the power levels needed to carry out dierent functions.
4. Flight Mode
: The text next to this icon indicates the current ight mode.
Tap to congure the Flight Controller settings. These settings allow you to modify ight limits and set gain
values.
5. AirSense Status
: The AirSense Status displays information about nearby manned aircraft to ensure flight safety,
including the distance between DJI aircraft and manned aircraft. AirSense will instruct users to land if
nearby aircraft are detected.
6. GPS Signal Strength
: Shows the current GPS signal strength. White bars indicate adequate GPS strength.
7. Vision Systems Status
: Tap this button to enable or disable features provided by the Vision Systems, and it displays the status
for all vision systems. The green icon indicates the corresponding vision system is available. The red icon
indicates the corresponding vision system is unavailable.
8. Remote Controller Signal
: This icon shows the strength of the remote controller signal. The icon will blink when an interference
is recognized during ight. When there are no additional warnings in DJI Pilot, it means that the interference
will not aect operation and overall ight experience.
9. Focus/Metering Button
/ : Tap to switch between focus and metering mode. Tap to select object for focusing or metering.
Auto Focus-Continuous will be triggered automatically according to the status of the aircraft and camera
after enabling Auto Focus.
10. HD Video Link Signal Strength
: This icon shows the strength of the HD video downlink connection between the aircraft and the
remote controller. The icon will blink when an interference is recognized during ight. When there are no
additional warnings in DJI Pilot, it means that the interference will not aect operation and overall ight
experience.
11. Zoom Value
1.0x
: Displays the zoom value. Tap to set the value.