Owner's Manual

Mavic 2 Enterprise Series User Manual
©
2019 DJI All Rights Reserved.
25
Flight Recorder
Flight data including ight telemetry, aircraft status information, and other parameters are automatically
saved to the aircraft’s internal data recorder. The data can be accessed using DJI Assistant 2 for Mavic.
Password Protection
The Mavic 2 Enterprise series supports password protection. This feature helps ensure secure access
to your aircraft and its onboard data storage, thus preventing leakage of sensitive information.
To set, change or delete the password, launch the DJI Pilot app, select Settings > Security Password.
Attaching and Detaching the Propellers
The Mavic 2 Enterprise series use low-noise propellers. There are two varieties of the propellers, which
are designed to spin in dierent directions. White marks are used to indicate which propellers should be
attached to which motors.
Marked Unmarked
Attach on motors with white marks Attach on motors without white marks
Turn the propellers in the indicated direction to mount and tighten.
Attaching the Propellers
Attach the propellers with the white marks to the motors with white marks and the unmarked propellers
to the motors without marks. Press each propeller down onto the motor and turn until it is secure.
Marked Unmarked
The password is stored in the aircraft only and will not be uploaded to the DJI server. Therefore,
you need to format the aircraft to delete the security password if you forget it. The data stored in
the aircraft will be delated once the aircraft is formatted.
To guarantee the maintenance, DJI will format the aircraft’s onboard data. Please remove
your security password and back up your data before sending your aircraft back for repair.
DJI takes no responsibility for the data loss.