INSPIRE 2 Quick Start Guide V1.
Inspire 2 The INSPIRETM 2 is a powerful aerial film making system with class leading agility and speed, redundancy features for maximum reliability, and new, smart features that make capturing complex shots easy. A new airframe design together with dual batteries boost flight time to 25* minutes. 10 9 11 8 1 7 12 2 6 19 5 13 20 21 14 15 16 3 4 17 18 1. FPV Camera 2. Forward Vision System 3. DJI TM Travel Mode Gimbal Connector V2.0 (DGC2.0) 4.
Remote Controller The Inspire 2 remote controller features DJI’s LIGHTBRIDGETM technology for a maximum transmission distance of up to 4.3 mi (7km)*. While flying the aircraft, you have a live HD view directly within the DJI GOTM 4 app on your paired device for a precise and responsive flying experience. When in dual remote controller mode, each of the two remote controllers separately control aircraft and camera and can be up to 328 feet (100m) apart.
Basic Knowledge Fly Safe DJI encourages you to enjoy flying in a safe, responsible and smart way. 400 ft EN Always fly under DO NOT FLY near or above people, near trees, power lines or buildings. DO MONITOR YOUR ALTITUDE and fly under 400 feet (120 meters). DO NOT FLY in rain, snow, fog, and wind speeds exceeding 22 mph or 10 m/s. DO MAINTAIN LINE OF SIGHT and avoid flying behind buildings or obstacles that block your view.
Using Inspire 2 1. Download the DJI GO 4 App 2. Watch the Tutorial Videos EN Search ‘DJI GO 4’ on the App Store or Google Play and download the app to your mobile device. Watch the tutorial videos at www.dji.com or in the DJI GO 4 app. DJI GO 4 App Tutorial Videos First-time activation requires your DJI account and internet connection. Internet DJI GO 4 app supports iOS 9 (or later) or Android 4.4 (or later). 3. Check the Battery Levels and Power on Press once to check the battery level.
5. Prepare the Remote Controller Unfold the mobile device holder and the antennas. EN Strong Optimal Transmission Range Weak Try to keep the aircraft inside the optimal transmission range. If the signal is weak, adjust the antennas or fly the aircraft closer. Unfold Dual Remote Controllers 2 Press the button to release the clamp. You are required to link the Master and Slave remote controllers. Place your mobile device and adjust the clamp to secure.
. Prepare the Aircraft EN 5x Insert the battery pair Press the power button a minimum of five times Unfold the landing gear to Landing Mode and power on Keep your hands away from the transformation mechanism when unfolding the landing gear. Press the power button at least five times can transform the aircraft to Travel Mode again. Make sure to press the battery remove button when removing the battery. 8. Mount the Gimbal and Camera Press the gimbal detach button to remove the cover.
10. Flight Ready to Go (GPS) Before taking off, ensure that the Aircraft Status Bar in the DJI GO 4 app indicates ‘Ready to Go (GPS)’ or ‘Ready to Go (Vision)’ in flying indoors. EN In the DJI GO 4 App Auto Takeoff Auto Landing Return-to-Home (RTH) Gimbal Working Modes The aircraft will take off and hover at an altitude of 4 feet (1.2 meters). The aircraft will land vertically and stop its motors. Brings the aircraft back to the Home Point. Tap again to stop the procedure.
Specifications Aircraft (Model: T650) EN Weight Diagonal Distance (propeller excluded) Max Takeoff Weight Max Takeoff Sea Level Max Flight Time Max Tilt Angle Max Ascent Speed Max Descent Speed GPS Hovering Accuracy Operating Temperature Gimbal Angular Vibration Range Controllable Range Max Controllable Speed Interface Type Downward Vision System Velocity Range Altitude Range Operating Range Operating Environment Ultrasonic Sensor Operating Range Ultrasonic Sensor Operating Environment Forward Visi
INSPIRE 2 www.dji.
