User Manual

14
©
2017 DJI All Rights Reserved.
INSPIRE 2 User Manual
Flight Status Indicator
The Inspire 2 comes with the Front LED, Rear LED and Aircraft Status Indicator. The positions of
these LEDs are shown in the gure below:
The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft
is turned on to indicate the front (or nose) of the aircraft (Front and rear LEDs can be turned off
in the DJI GO 4 app). The Aircraft Status Indicator communicates the system status of the ight
controller. Refer to the table below for more information about the Aircraft Status Indicator.
Aircraft Status Indicator Description
Normal
Red, yellow, green, blue and purple ashes Turning On and Self Diagnostic Testing
×4 Four yellow ashes Warming Up
Slow green ashing P-mode with GPS*
×2 Two green ashes
P-mode with Forward and Downward
Vision Systems*
Slow yellow ashing
No GPS and Forward and Downward
Vision Systems
Fast green ashing Braking
Warning
Fast yellow ashing Remote Controller Signal Lost
Slow red ashing Low Battery Warning
Fast red ashing Critical Low Battery Warning
Red ashing IMU Error
— Solid Red Critical Error
Fast alternating red and yellow ashing Compass Calibration Required
* Slow green ashes indicate P-Mode and fast green ashes indicate S-mode.
Rear LEDFront LED
Aircraft Status Indicator