User's Manual

8
©
2017 DJI All Rights Reserved.
ZENMUSE X7 User Manual
Mount the camera lens with the lens mount facing downward to prevent dust from
entering the sensor, which may negatively aect its performance. DO NOT touch the
sensor unit if you nd dust or impurities on it, and refer to Camera Maintenance on how
to clean the sensor unit.
DO NOT press the lens release button while attaching the lens.
3. Align the two lens mounting indexes on the camera body and camera lens, and insert the
camera lens into the camera body.
4. Rotate the camera lens clockwise until you hear a click.
5. Rotate the camera lens counter-clockwise after mounting the lens to make sure the lens is
rmly attached.
1
4
1
3
1
3
Mounting the Zenmuse X7 to an Aircraft
The following steps show how to mount the Zenmuse X7 to a DJI Inspire 2 drone:
1. Remove the gimbal cap from the Zenmuse X7.
2. Press the gimbal and camera detach button on the Inspire 2. Rotate the gimbal cap on the
Inspire 2 to remove it.
3. Align the white dot on the gimbal with the red dot on the Inspire 2 and insert the gimbal.
4. Rotate the gimbal lock to the locked position by aligning the red dots.
2 3
4
11