User Guide

5
EN
Status LED Descriptions
Status LED Description
Blinks Green Charging
— Solid Green Fully charged
Blinks Red
Battery Charger Error. Retry with
an ofcial battery charger.
— Solid Red Battery error
Blinks Yellow
Battery temperature too high/
low. Temperature must be within
operating range (5°-40℃)
— Solid Yellow Ready to charge
Alternating
Green Blinks
Intelligent Battery not detected
Updating the Firmware
DJI will release firmware updates when available. Refer to the
ofcial DJI website and follow the instructions below to update the
rmware.
1. Download the latest rmware update program from the ofcial
DJI website.
(http://www.dji.com/crystalsky/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using
a Micro USB cable.
3. Run the rmware update program. Press the update button and
wait for the process to nish.
4. The Charging Hub will automatically restart when the update
has been successfully completed.
5. Repeat this process if the rmware update fails for any reason.