User Manual

©2013-2014 DJI. All Rights Reserved. 54
Recommended Mapping for Futaba Transmitter (Mode 2) User
Controller Unit Channel
Receiver Channel
Recommended Transmitter Switch
A
Channe 1 (AIL)
Joystick J1
E
Channe 2 (ELE)
Joystick J2
T
Channe 3 (THR)
Joystick J3
R
Channe 4 (RUD)
Joystick J4
U
Channe 7 (AUX5)
3-Position switch, e.g. SG
K1~K6
Channe 5 (GEAR)
Knob switch, e.g. LD, RD
Pitch
Channe 6 (Vpp)
Knob switch, e.g. LD, RD
D1/D3/D2
----
----
D4
Channe 9 (AUX1)
2-Position switch, e.g. SF
IOC
Channe 10 (AUX2)
3-Position switch, e.g. SG
Go Home
Channe 11 (AUX3)
2-Position switch with spring back function, e.g. SH
Gear
Channe 8 (AUX4)
2-Position switch, e.g. SF
H3-2D
Channe 12（AUX5）
Knob switch, e.g. LD、RD
Settings of gain values for Your Reference
To set the value of basic gain and attitude gain you can refer to the following diagram. These values are only for
reference and may vary in practice.
The Transmitter setup of FUTABA
Please configure the Frequency item on your Transmitter adhere to the table below. (The names of FASST modes
here are based to the Transmitter FUTABA T8FG, please ensure to select the most similar mode as the names
differs for different Transmitters)
Aircraft
Configuration Information
Basic
Attitude
Motor
ESC
Propeller
Battery
Weight
Pitch
Roll
Yaw
Pitch
Roll
Vertical
F450
DJI-2212
DJI-30A
DJI-8 Inch
3S-2200
890 g
150
150
135
150
150
140
F550
DJI-2212
DJI-30A
DJI-8 Inch
4S-3300
1530 g
170
170
150
160
160
150
S800 EVO/Z15
DJI-4114
DJI-40A
DJI-15Inch
6S-15000
7000g
140
140
130
140
140
130
S1000/5D gimbal/
5D camera
DJI-4114
DJI-40A
DJI-15Inch
6S-15000
9200g
120
120
120
170
170
120
S1000/5D gimbal/
5D camera
DJI-4114
DJI-40A
DJI-15Inch
6S-15000
9300g
120
120
120
170
170
120