MAVIC PRO User Manual 2017.10 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this manual 2 Legends 2 Read Before the First Flight 2 Video Tutorials 2 Download the DJI GO 4 App 2 Download the DJI Assistant 2 2 Product Profile 6 Introduction 6 Features Highlights 6 Preparing the Mavic Pro 6 Aircraft Diagram 8 Remote Controller Diagram 8 Aircraft 11 Aircraft Profile 11 Flight Mode 11 Flight Status Indicator 12 Return-to-Home (RTH) 13 Intelligent Flight Mode 17 Forward and Downward Vision System 24 Flight Recorder 27 Attaching and D
DJI GO 4 App 45 Equipment 45 Editor 50 SkyPixel 50 Me 50 Flight Flight Environment Requirements 52 Flight Limits and No-Fly Zones 52 Preflight Checklist 53 Calibrating the Compass 54 Auto Takeoff and Auto Landing 55 Starting/Stopping the Motors 56 Flight Test 56 Appendix 4 52 59 Specifications 59 Firmware Updates 61 Intelligent Flight Mode 61 Remote Controller LCD Screen Menu Information 62 After-Sales Information 63 © 2017 DJI All Rights Reserved.
Product Profile This section introduces the Mavic Pro and lists the components of the aircraft and remote controller. © 2017 DJI All Rights Reserved.
Product Profile Introduction Product Profile The DJI Mavic Pro is DJI’s smallest flying camera, featuring a fully stabilized camera, Intelligent Flight Modes and Obstacle Avoidance inside a revolutionary folding design. It captures 4K videos and 12 megapixel photos, and is capable of both ActiveTrackTM and TapFlyTM making complex shots effortless. Mavic Pro boasts a maximum flight speed of 40 mph (65 kph) and a maximum flight time of 27 minutes*.
Mavic Pro User Manual Marked Unmarked Unfold the Arms Product Profile 1. Unfold the front arms, followed by the rear arms of the aircraft as shown. 2. Unfold all propeller blades. Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before powering on the aircraft, or it may affect Self Diagnostic Testing. Preparing the Remote Controller 1. Unfold the mobile device clamps and the antennas. 2.
Mavic Pro User Manual Aircraft Diagram 1 2 3 4 5 1. Propeller 2. Motor 6 3. Front LED Indicator Product Profile 4. Forward Vision System 7 8 9 11 10 5. Landing Gear (with built-in antennas) 6. Gimbal and Camera 7. Intelligent Flight Battery 12 8. Link Button 9. Linking Status Indicator 10. Camera Micro SD Card Slot 11. Control Mode Switch 12. Micro USB Port 13 14 13. Aircraft Status Indicator 14. Downward Vision System Remote Controller Diagram 1.
Mavic Pro User Manual 5. LCD Screen Displays the aircraft and Remote Controller's 8. Mobile Device Clamp Securely mounts your mobile device onto the remote controller. system status. 6. Flight Pause Button Press once for emergency braking. 9. USB Port Connection to mobile device for DJI GO 4 app. 7. 5D Button The default configuration is listed below. Set these values based on your preference in Product Profile the DJI GO 4 app.
Aircraft This section introduces the Flight Controller, Forward and Downward Vision System, and the Intelligent Flight Battery. 10 © 2017 DJI All Rights Reserved.
Aircraft Aircraft Profile The Mavic Pro aircraft comprises of a flight controller, video downlink, propulsion system and an Intelligent Flight Battery. This section introduces the features of the flight controller, video downlink and other aircraft components. Flight Mode When the Forward Vision System is enabled and lighting conditions are sufficient, the maximum flight attitude angle is 16° with a maximum flight speed of 22 mph (36 kph).
Mavic Pro User Manual Flight Status Indicator The Mavic Pro has Front LEDs and Aircraft Status Indicator. The positions of these LEDs are shown in the figure below: Front LED Aircraft Status Indicator Aircraft Front LED The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is turned on to indicate the front (or nose) of the aircraft (the Front LED can be turned off in the DJI GO 4 app).
Mavic Pro User Manual Return-to-Home (RTH) Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenarios in detail. Description GPS Home Point If a strong GPS signal was acquired before takeoff, the Home Point is the location from which the aircraft launched. The GPS signal strength is indicated by the GPS icon ( ).
Mavic Pro User Manual Smart RTH Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the onscreen instructions when GPS is available to initiate Smart RTH. The aircraft status indicator will blink to display the current status. The aircraft will sense and avoid obstacles on its flight path during Smart RTH. The aircraft may choose to navigate or hover in place to avoid collision.
Mavic Pro User Manual Battery Level Warning Remark Aircraft Status Indicator DJI GO 4 App Flight Instructions Tap “Go-home” to have the aircraft return to the Home point automatically, or “Cancel” to resume normal flight. If no action is taken, the aircraft will automatically go home after 10 seconds. Remote controller will sound an alarm. Fly the aircraft back and land it as soon as possible, then stop the motors and replace the battery. Battery power is low. Land the aircraft.
Mavic Pro User Manual RTH Safety Notices The aircraft cannot avoid obstructions during RTH when the Forward Vision System is disabled. Therefore, it is important to set a suitable Failsafe altitude before each flight. Launch the DJI GO 4 app and enter “Camera” and tap to set the Failsafe altitude. 5m H 10 m RTH Altitude Aircraft 10 m RTH Altitude 5m H If Return to Home (RTH), including Smart RTH and Low Battery RTH, is 5m triggered and the aircraft is further than 20 m from the home point: 1.
Mavic Pro User Manual 5 meters 15 meters Intelligent Flight Mode TapFly Introduction With the TapFly feature, users can now tap on the mobile device screen to fly in the designated direction without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and hover provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux).
Mavic Pro User Manual 3. Tap once on the target direction and wait for the and the aircraft will fly in that direction. READY TO GO (GPS) 09:29 icon to appear. Tap again to confirm the selection P-GPS 12 61% AE D 30M H 10.0M Aircraft H.S 10.0 M/S VS 2.0M/S VPS 2.0M DO NOT guide the aircraft to fly towards people, animals, small and fine objects (e.g. tree branches and power lines) or transparent objects (e.g. glass or water). Watch for the obstacles in the flight path and stay clear of them.
Mavic Pro User Manual Exit TapFly Use the following methods to exit TapFly: 1. Press the Flight Pause button on the remote controller. 2. Pull back the pitch stick on the remote controller for 3 seconds or above. 3. Tap “STOP” button on the screen. STOP OR OR Aircraft will stop and hover after exiting from TapFly. Tap a new target direction to continue flying or begin manual flight. ActiveTrack ActiveTrack allows you to mark and track a moving object on your mobile device screen.
Mavic Pro User Manual 3. Tap on the subject you want to track then tap to confirm selection. If the subject is not automatically recognized, drag a box around it. The box will turn green when tracking is in progress. If the box turns red, the object could not be identified and you should try again. READY TO GO (GPS) 09:29 P-GPS 12 61% AE ActiveTrack Aircraft D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.
Mavic Pro User Manual You must follow local privacy laws and regulations when using ActiveTrack. Aircraft will not be able to avoid obstacles while in Profile or Spotlight Mode. Use these modes in open areas. The aircraft will sense and avoid obstacles on its flight path. If the aircraft loses track of the subject, because it is moving too fast or obscured, re-select the subject to resume tracking. Exiting ActiveTrack STOP Aircraft Use the following methods to exit ActiveTrack: 1.
Mavic Pro User Manual Tripod Mode Tap the icon in the DJI GO 4 app to enable Tripod Mode. In Tripod Mode, the maximum flight speed is limited to 2.2 mph (3.6 kph). Responsiveness to stick movements is also reduced for smoother more controlled movements. Only use Tripod Mode where the GPS signal is strong or light conditions are ideal for the vision system. If GPS signal is lost and if the vision system cannot function, it will automatically switch to Atti mode.
Mavic Pro User Manual QuickShot QuickShot shooting modes include Rocket, Dronie and Helix. Mavic will record a video according to the selected shooting mode and then automatically generate a 10-second short video. The video can then be viewed, edited, or shared to social media from the Playback menu. Dronie : Fly backward and upward, with the camera locked on your subject. Helix: Fly upward, spiraling around your subject. Rocket: Ascend with the camera pointing downward. 1.
Mavic Pro User Manual 4. View and edit the generated or original video using Playback. QuickShot is only available when GPS signal is strong. Tap in DJI GO 4 or pull a control stick opposite to the direction of flight to exit QuickShot anytime during shooting. In QuickShot, the aircraft cannot avoid obstacles automatically. Please make sure to only use QuickShot in wide open areas.
Mavic Pro User Manual Calibrating Sensors Forward and Downward Vision Systems cameras installed on the aircraft are calibrated on delivery. However these cameras are vulnerable to excessive impact and will require occasional calibration via DJI Assistant 2 or the DJI GO 4 app. Follow the steps below to calibrate the camera. 02 03 Align the boxes Pan and tilt the aircraft Aircraft 01 Point the aircraft toward the screen Repeat the steps above to calibrate the Downward Vision System cameras.
Mavic Pro User Manual Assisted Braking from Forward Vision System Powered by the Forward Vision System, the aircraft is able to actively brake when obstacles are detected in front. Forward and Downward Vision Systems work best when lighting is adequate and the obstacle is clearly marked or textured. The aircraft must fly at no more than 22mph (36kph) to allow sufficient braking distance. Aircraft The performance of the Forward and Downward Vision Systems are affected by the surface being flown over.
Mavic Pro User Manual Flight Recorder Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft to the PC through the Micro USB port. Attaching and Detaching the Propellers Use only DJI approved propellers with your Mavic Pro. White ring and unmarked propellers indicate where they should be attached and in which direction whey should spin.
Mavic Pro User Manual Intelligent Flight Battery Introduction The DJI Intelligent Flight Battery has a capacity of 3830 mAh, a voltage of 11.4 V, and a smart charge/ discharge functionality. It should only be charged using an appropriate DJI approved charger. Aircraft Intelligent Flight Battery Charger The Intelligent Flight Battery must be fully charged before using it for the first time. DJI Intelligent Flight Battery Functions 1.
Mavic Pro User Manual Using the Battery Battery Level Indicators LED1 LED2 LED3 LED4 Power Button Turning On: Press the Power Button once, then press again and hold for 2 seconds to turn on. The remote controller system status screen will display the current battery level. Turning Off: Press the Power Button once, then press again and hold for 2 seconds to turn off. Low Temperature Notice: 1. Battery capacity is significantly reduced when flying in low temperature (-10°C and 5°C) environments. 2.
Mavic Pro User Manual Battery Level Indicators LED1 LED2 LED3 LED4 Battery Level 87.5%~100% 75%~87.5% 62.5%~75% 50%~62.5% 37.5%~50% 25%~37.5% Aircraft 12.5%~25% 0%~12.5% =0% Charging the Intelligent Flight Battery 1. 2. 3. 4. Connect the Battery Charger to a power source (100-240V, 50/60Hz). Connect the Battery to the Charger to start charging. The Battery Level Indicator will display the current battery level as it is charging.
Mavic Pro User Manual Battery Protection LED Display The table below shows battery protection mechanisms and corresponding LED patterns.
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. 32 © 2017 DJI All Rights Reserved.
Remote Controller Remote Controller Profile The Mavic Pro remote controller is a multi-function wireless communication device that integrates the video downlink system and aircraft remote control system. The video downlink and aircraft remote control system operate at 2.4 GHz. The remote controller features a number of camera control functions, such as taking and previewing photos and videos, as well as controlling gimbal motion. The battery level is displayed via the LCD Screen of the remote controller.
Mavic Pro User Manual Charging the Remote Controller Charge the remote controller using the included charger. Refer to the figure below for more details. Power Outlet Charger Remote Controller Controlling the Camera Shoot videos/photos, and adjust camera settings via the Shutter Button, Record Button, and Camera Settings Dial on the remote controller. 4 1 3 2 1. Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, without letting go of the remote controller.
Mavic Pro User Manual Controlling the Aircraft This section explains how to control the orientation of the aircraft through the remote controller. Control can be set to Mode 1 , Mode 2 or Mode 3, or to a custom mode.
Mavic Pro User Manual Remote Controller (Mode 2) ( Aircraft Indicates Nose Direction) Remarks Moving the left stick up and down changes the aircraft’s elevation. Push the stick up to ascend and down to descend. When both sticks are centered, the Mavic Pro will hover in place. The more the stick is pushed away from the center position, the faster the Mavic Pro will change elevation. Always push the stick gently to prevent sudden and unexpected elevation changes.
Mavic Pro User Manual Flight Mode Switch Toggle the switch to select the desired flight mode. Choose between P-mode and S-mode. Position SPORT SPORT Flight Mode P-mode SPORT S-mode S-mode (Sport): The handling of the aircraft is adjusted in to enhance maneuverability and speed. Maximum speed is increased to 40mph (65kph). Forward Vision System is disabled in this mode. The Flight Mode is locked in P Mode by default, regardless of switch position.
Mavic Pro User Manual Optimal Transmission Range The transmission signal between the aircraft and the remote controller is most reliable within the area that depicted below: Optimal Transmission Range Remote Controller strong weak Ensure that the aircraft is flying within the optimal transmission zone. To achieve the best transmission performance, maintain the appropriate relationship between the operator and the aircraft.
Mavic Pro User Manual Dual Remote Controller Mode Mavic Pro supports Dual Remote Controller Mode, Mavic Pro firmware version 01.03.0400, DJI GO 4 app iOS v4.0.5 or DJI GO 4 app Android v4.0.5 are required. Two remote controllers can connect to the same aircraft in Dual Remote Controller Mode.
Mavic Pro User Manual Linking the Remote Controller The remote controller is linked to your aircraft before delivery. Linking is only required when using a new remote controller for the first time. Follow these steps to link a new remote controller: 1. Turn on the remote controller and connect to the mobile device, and turn on the aircraft. Launch the DJI GO 4 app. 2. Enter “Camera” and tap on and then tap the “Linking Primary RC” or “Linking Secondary RC” button to confirm.
Camera and Gimbal This section provides the technical specifications of the camera and explains the gimbal’s operation modes. © 2017 DJI All Rights Reserved.
Camera and Gimbal Camera Profile The on-board camera uses the 1/2.3 inch CMOS sensor to capture video up to 4K at 30 fps with the Mavic Pro and 12 megapixel stills. You may choose to record video in either MOV or MP4 formats. Available picture shooting modes include burst, continuous, and interval mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO 4 app.
Mavic Pro User Manual Gimbal Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. The gimbal can tilt the camera within a 120˚ range. 30° 0° Use the gimbal dial on the remote controller to control camera tilt, or go to Camera View in the DJI GO 4 app, tap and hold on the screen until a blue circle appears, then drag the circle to control the camera’s tilt.
DJI GO 4 App This section introduces the main functions of the DJI GO 4 app. 44 © 2017 DJI All Rights Reserved.
DJI GO 4 App The DJI GO 4 app is a mobile application designed specifically for DJI equipment. Use this app to control the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, SkyPixel and Me sections, which are used for configuring your aircraft, editing and sharing your photos and videos with others.
Mavic Pro User Manual 1. System Status : This icon indicates aircraft flight status and various warning messages. READY TO GO (GPS) 2. Obstacles Detection Status : Red bars are displayed when obstacles are close to the aircraft. Orange bars are displayed when obstacles are in detection range. 3. Battery Level Indicator : The battery level indicator provides a dynamic display of the battery level.
Mavic Pro User Manual 12. General Settings : Tap to enter general setting menu for setting metrics, enabling livestream, display flight routes and so on. 13. Auto Exposure Lock AE : Tap to lock the exposure value. 14. Gimbal Slider : Displays the pitch of the gimbal. 15. Photo/Video Button : Tap to switch between photo and video recording modes. 16. Shoot / Record Button : Tap to start shooting photos or recording video. DJI GO 4 App / 17.
Mavic Pro User Manual 24. Back : Tap this icon to return to the main menu. Slide left in the Camera view to enter the menu shown below. READY TO GO (GPS) 09:29 P-GPS 12 61% AE Portrait/Landscape Gimbal up/down Home Point: Aircraft Home Point: Me Adjust screen brightness DJI GO 4 App D 30M H 10.0M H.S 10.0 M/S VS 2.0M/S VPS 2.0M Portrait/Landscape Switch to Portrait mode by tapping the icon. Gimbal up/down Tap the icon to point the camera downward or forward.
Mavic Pro User Manual Launch the DJI GO 4 app and tap the icon on the top right of your screen, then scan the WiFi QR Code on the front arm to start connection. Note that this feature is available on Android devices. When using Wi-Fi in a wide open area with no Electromagnetic Interference, transmission distance is approximately 262ft (80m) at an altitude of 164ft (50m). The maximum flight speed is 9mph (14kph), maximum ascent speed is 2m/s and maximum descent speed is 1m/s.
Mavic Pro User Manual Editor An intelligent video editor is built into the DJI GO 4 app. After recording several video clips and downloading them to your mobile device, go to Editor on the home screen. You can then select a template and a specified number of clips which are automatically combined to create a short film that can be shared immediately. SkyPixel View and share the photos and videos in the SkyPixel page.
Flight This section describes safe flight practices and flight restrictions. © 2017 DJI All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI GO 4 app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s, snow, rain and fog. 2. Fly in open areas.
Mavic Pro User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO 4 App Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Mavic Pro User Manual Calibrating the Compass Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so. Observe the following rules when calibrating your compass: DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite, parking structures, and steel reinforcements underground. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
Mavic Pro User Manual 4. Re-calibrate the aircraft if the aircraft status indicators blink red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding. If the aircraft status indicator is blinking red and yellow alternately after placing the aircraft on the ground, the compass has detected magnetic interference.
Mavic Pro User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner or outer corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors Flight There are two methods to stop the motors. Method 1: When Mavic Pro has landed, push the left stick down , then conduct the same CSC that was used to start the motors, as described above .
Mavic Pro User Manual When the Aircraft Status Indicator blinks yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. 2. 3. 4. 5. Go through the full pre-flight checklist before each flight. Select the desired gimbal operation mode in the DJI GO 4 app.
Appendix 58 © 2017 DJI All Rights Reserved.
Appendix Specifications Aircraft Weight 1.62 lbs (734 g) Weight (including gimbal cover) 1.64 lbs (743 g) Dimensions 83 × 83 × 198 mm (folded) Diagonal Length (propellers excluded) 335 mm Max Ascent Speed 16.4 ft/s (5 m/s) in Sport Mode Max Descent Speed 9.8 ft/s (3 m/s) Max Speed 40.4 mph (65 kph) in Sport Mode without wind Max Service Ceiling Above Sea Level 16404 feet (5000 m) Max Flight Time Max Hovering Time Avg. Flight Time (0 wind at a consistent 15.
Mavic Pro User Manual Appendix Lens 78.8° FOV, 28 mm (35 mm format equivalent) f/2.2 Distortion <1.5% Focus from 0.5 m to ∞ ISO Range 100 - 3200 (video), 100 - 1600 (photo) Electronic Shutter Speed 8 s to 1/8000 s Max Image Size 4000×3000 Still Photography Modes Single shot Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias Interval HDR Video Recording Modes C4K: 4096×2160 24p, 4K: 3840×2160 24/25/30p 2.
Mavic Pro User Manual Firmware Updates Use DJI Assistant 2 or DJI GO 4 app to update aircraft and remote controller. Using the DJI GO 4 App Connect the remote controller and the DJI GO 4 app, You will be reminded if a new firmware upgrade is available. To start upgrading, connect your mobile device to the Internet and follow the on-screen instructions. Using DJI Assistant 2 The remote controller and the aircraft can also be updated separately.
Mavic Pro User Manual Follow Me A virtual tether is created between the aircraft and the mobile device so that the aircraft can track your movement as you move. Note that Follow Me performance is subject to the GPS accuracy on the mobile device. Waypoints Record a flight path, then the aircraft will fly along the same path repeatedly while you control the camera and orientation. The flight path can be saved and re-apply in the future.
Mavic Pro User Manual After-Sales Information Visit the following pages to learn more about After-sales policy and warranty information: 1. After-sales Policy: http://www.dji.com/service 2. Refund Policy: http://www.dji.com/service/refund-return 3. Paid Repair Service: http://www.dji.com/service/repair-service 4. Warranty Service: http://www.dji.com/service/warranty-service © 2017 DJI All Rights Reserved. 63 Appendix WAY POINT In Waypoints Mode. FOLLOW ME In Follow Me Mode.
DJI Support http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/mavic If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. MAVICTM is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.
