Instruction manual

48
49
Removing Seat Pad for Cleaning
Remove harness as described in the “Belt-Positioning
Booster” section.
From back of shell, release
the elastic straps.
1
WARNING
!
Do not use this child restraint without the
seat pad. Failure to do this can result in
serious injury.
continued on next page.
11
10
Fit loops on harness ends
onto the splitter plate.
NOTE: Make sure
harness is completely on
splitter plate and it does
not twist.
From the back, pull
harness through the back.
Make sure the harness
goes OVER the metal
bar.
WARNING
!
Failure to place harness over the metal bar
can result in serious injury or death.
WARNING
!
Failure to reattach the harness system
correctly can result in serious injury or
death.
From the front, fully
recline the child restraint
and reach under the front
of the shell, between shell
and base, and release the
front elastic straps.
2
4358-5356 US All in One 7/26/10 4:16 PM Page 51