Specifications

23
ASC-5 Auto Sample Changer
(P/N 206-23810-**)
Combine with a sipper unit or syringe sipper to build an automated multisample
spectrophotometry system.
• The aspirating nozzle is programmed to move in the X, Y, and Z (vertical) directions.
• Up to eight sets of operational parameters, including the sizes of racks and the numbers of
test tubes, may be stored in the battery backup protected les.
• Up to 100 test tubes may be set together on the rack.
(Note)
A commercially available test tube stand, with a footprint smaller than 220 × 220 mm, is
applicable.
An ASC USB adapter (P/N 206-25235-91) is required.
Sample Pretreatment
Automation Connection Kit
(P/N 206-80880-02)
Flow cell unit
Connection
cable
The kit enables connection with the Gilson GX-271 Liquid Handler.
The liquid handler can automatically perform a variety of sample pretreatments
including dispensing, dilution, and the addition
of reagents. This kit enables the liquid handler
and spectrophotometer to be interlocked for
measurements.
• The connection kit consists of a ow cell unit and
connection cable. The liquid handler is not included.
GX-271 Liquid Handler
Micro Flow Cell
10-mm Micro Flow Cell with Holder
5-mm Micro Flow Cell with Holder
P/N Volume Optical Path Length Model
204-06222
204-06222-01
0.3 mL
0.15 mL
10 mL
5 mL
Used for the continuous
analysis of samples such as the
liquids produced by column
chromatography.
• Inner diameter: 1 mm; Optical path length: 10 mm; Inner volume: 8 L
• Flow cell on the sample side and cell holder with mask on the reference side
• SUS tube: Outer diameter: 1.6 mm; Inner diameter: 0.3 mm
Front Panel with Holes
(P/N 204-27588-03)
Allows the tubes of a ow cell, for example, to be connected through the front
panel of the instrument.
Flow Cell for HPLC
(P/N 206-12852)
With this ow cell attached, the
spectrophotometer can be used
as a variable-wavelength UV-VIS
detector for an HPLC system.
• Inner diameter of tube: 1 or 2 mm
Low-Pressure Mercury Lamp Unit
(P/N 206-28300-41)
This unit is used to install a
low-pressure mercury lamp for
wavelength accuracy conrma-
tion in the system's light source
compartment. It can be
interlocked with the validation
software provided with the
system.