Specifications

19
If using a 4-cell-type universal rectangular cell holder, use this as a reference-
side cell holder if necessary.
Holds two cylindrical cells with an optical path length of 10, 20, 50, or 100 mm.
Holds supermicro cells for
measurement of extremely small
volume samples. The cell height is
adjustable, and the required
sample volume can be adjusted in
the range of 50 to 200 L,
depending on the type of black cell
used.
Required when using semi-micro
cells or micro cells with an optical
path width of 4 mm or less.
(The mask width can be adjusted.)
Recommended for small-volume and precious samples, such as in biological
applications. The solution sample is aspirated into the capillary cell and the cell
is set in the capillary adapter cell, where it is analyzed.
The holder is the same size as a 10-mm square cell and can be mounted to the
standard cell holder.
(P/N 206-69746)
Holds two rectangular cells with an optical path length of 10, 20, 30, 50, 70, or
100 mm.
Reference-Side Rectangular Long-Path
Absorption Cell Holder
(P/N 204-28720)
Universal Rectangular Cell Holder,
Four-Cell Type
(P/N 204-27208)
Long-Path Rectangular Cell Holder
(P/N 204-23118-01)
Cylindrical Cell Holder
(P/N 204-06216-02)
Micro Cell Holder with Mask
3-μL Capillary Cell Set for
Ultramicro Volume Measurement
(P/N 204-06896)
Supermicro Cell Holder
(P/N 206-14334)
• Applicable cells: (7), (7)’, and (8) in the list
of cells on page 18. Cells are not included.
• Mask: Choice of W1.5 × H1 mm or W1.5 × H3 mm
• The minimum sample volume required: 3 L when the tube closure is used (theoretical value)
• Supplied with 100 capillaries (made of quartz) and a tube closure
• Inner diameter of capillary: 0.5 mm
(Note)
Usually, the effective optical path length is approximately one-twentieth of a 10-mm square cell.
Holds four rectangular cells with an optical path
length of 10, 20, 30, 50, 70, or 100 mm.
(Note)
The Four-Cell Sample Compartment
Unit (P/N 206-23670-91) is required.
When a rectangular, long-path cell is
used on the reference side, its holder
(P/N 204-28720) is required.