Installation Instructions

ManualsBrandsDixie Pacific ManualsBuilding materialsDixie-Pacific™ DuraSnap™ 4 x 4 x 9' Post Wrap

Solvent weld adhesive sold seperately.

www.dixiepacic.com

1-800-468-5993

D uraSnap

™

4” x 9’ SQUARE

cPVC Column Wrap and Trim

It’s as easy as A, B, C.

• Designed to Wrap a Max. 3

”

Structural Post

• Easy Installation

• Interior and Exterior Use

• Weather and Insect Resistant

• Low maintenance

• Light Weight

• Made of High Quality

Cellular PVC

• 25 Year Limited Warranty

A CB

MDS0409B

0 08507 92626 7

Installation instructions on reverse side of label.

Measure and Cut Apply Adhesive Wrap and Snap

TRIM KIT INCLUDED

Summary of content (4 pages)

PAGE 1
DuraSnap™ By 4” x 9’ SQUARE cPVC Column Wrap and Trim It’s as easy as A, B, C. A B C Measure and Cut Apply Adhesive Wrap and Snap • Designed to Wrap a Max. 3 3/4” Structural Post • E asy Installation • I nterior and Exterior Use • Weather and Insect Resistant • L ow maintenance • Light Weight •M ade of High Quality Cellular PVC • 2 5 Year Limited Warranty TRIM KIT INCLUDED Solvent weld adhesive sold seperately. www.dixiepacific.
PAGE 2
DuraSnapTM Installation Instructions Instrucciones de Instalacion para DuraSnapTM TOOLS RECOMMENDED: Tape Measure, Circular Saw, Rubber Mallet, PVC Adhesive* NOTE: Do not remove tape from column wrap before Step 4. Step 1 – Handle DuraSnap™ column wrap with care to prevent the joint tape from tearing. Cut column wrap to the proper height. (Note: DuraSnap™ Column Wrap is not load bearing. Column wrap must be cut 1/8”- 1/4” shorter than the actual opening for expansion/contraction.
PAGE 3
DuraSnap™ By 6” x 9’ SQUARE cPVC Column Wrap and Trim It’s as easy as A, B, C. A Measure and Cut B Apply Adhesive • Designed to Wrap a Max. 53/4” Structural Post • Easy Installation • Interior and Exterior Use • Weather and Insect Resistant • Low maintenance • Light Weight • Made of High Quality Cellular PVC • 25 Year Limited Warranty MDS0609B 0 08507 92625 Wrap and Snap TRIM KIT INCLUDED Solvent weld adhesive sold seperately. www.dixiepacific.
PAGE 4
DuraSnapTM Installation Instructions Instrucciones de Instalacion para DuraSnapTM TOOLS RECOMMENDED: Tape Measure, Circular Saw, Rubber Mallet, PVC Adhesive* NOTE: Do not remove tape from column wrap before Step 4. Step 1 – Handle DuraSnap™ column wrap with care to prevent the joint tape from tearing. Cut column wrap to the proper height. (Note: DuraSnap™ Column Wrap is not load bearing. Column wrap must be cut 1/8”- 1/4” shorter than the actual opening for expansion/contraction.