Specifications
9
Specifications
Engine • Kohler, CV20S, vertical shaft,
V-twin, four cycle, air-cooled engine
• 20 Hp total output at 3750 RPM
• 38.0 in
3
displacement
• Electric start, gear-driven oil pump
for full pressure lubrication
• Engine-mounted, replaceable 25 mi-
cron Kohler oil filter
• Pulse fuel pump (more efficient and
less moving parts than a mechan-
ical fuel pump)
• Kohler muffler to meet noise re-
quirements
Electrical • 12 volt, 66 plate, 295 cold cranking
amp, maintenance-free battery
• 15 amp alternator/starter with
regulator-rectifier
• Electric start
• ALL NEW operator presence
controls. Seat switch, clutch switch,
parking brake, and steering speed
control lever switches all combine to
provide a safe environment for oper-
ators
• Hg tilt shut-off switch
Weight • 785 pounds
Fuel • 6.0 US gallons
Main • Welded 2" x 2" frame
Frame • Stainless steel fenders with cup
holder
• ALL NEW skid-proof, easy clean,
flip-up floor pan
Mower • Switch-operated, electric clutch
Deck deck engagement
• 1" diameter spindle shafts with self-
tightening spindle assembly
Special Features, Capabilities,
and Specifications (continued)
• Keyless spindle extends greasable
bearing life by preventing side load
• Welded baffles
• Level pitch while raising or
lowering deck
• Deck mounted to rigid frame (does
not run on the ground)
• Deck rollers to prevent scalping
ground
• Wide open mouth for easy dis-
charge
• Four (4) deck leveling bolts
Deck • Ten (10) gauge shell (.135"
Materials thickness)
• .187" thick reinforcing top plate
(bolted, not welded)
• Total thickness in critical area
= .322"
• One piece cast hubs (bolted, not
welded)
• Split steel spindle pulleys (.1875"
thick)
Cutting • 1.75" to 5.75" (1.25" with under-
Height slung blades)
Cut Track
Width • 50" Length • 49"
Overall Overall
Width • 54" Length • 75"
Drive • Two (2) Hydrogear BDP-10A
pumps, direct belt-driven
• Two (2) White Hydraulics CE
series 14.6 in
3
hydraulic motors with
automotive style brake
• Two (2) 40 micron hydraulic filters
• Two (2) hand-operated forward/
reverse steering/braking controls
For Dixie Chopper Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com