Owner`s manual

13
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
SERVICE AT INTERVALS
INDICATED
WEEKLY OR
100 HOURS
MONTHLY OR
500 HOURS
ANNUALLY OR
1000 HOURS
Verify safety interlock system
Visually inspect unit for loose
hardware and/or damaged parts
Visually inspect tires
Check fuel level and for leaks
Check Engine to Deck Belt Tension
Check blades for wear and fitment
Check OCDC in Lowest Position
Check oil level, engine
Check oil level, hydraulic
Clean Donaldson Air Filter End Cap
X
Clean Engine Air Filter X
Check Engine to Transmission Belt X
Change Engine Oil Filter X
Lube Deck Spindle Assemblies X
Lube Deck Engaging Swing Arm X
Lube Scissor Linkage Pivot X
Lube Deck Engaging Rod X
Lube Front Wheel Bearings X
Lube Deck Idler Arm Pivot X
Lube Steering Lever Blocks X
Replace Donaldson Air Filter Element X
Change Hydraulic Filters X
Change Amsoil Filter X
Change Hydraulic Drive Oil X
Change Engine Oil X
Lube Front Caster Bearings X
Clean/Replace Spark Plugs X
Check Steering for Creep in Neutral X
Check Front and Rear Tires for Wear X
Remove Belts and Check Spindle
Bearings, Idlers, and Pulleys
X
Daily or every 4 hours
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily or every 4 hours
Routine Maintenance
(1)
(1)
(2)
(3)
(3)
(3)
(4)
(4)
(4)
(4)
(4)
(5)
(5)
(5)
(5)
NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter, change oil after every 100 hours of operation. Change more often under dusty or dirty
conditions and during hot weather periods.
2. Torque initially and after fi rst 2 hours of operation.
3. Perform initial hydraulic fi l
ter change after 50 hours of operation.
4. Change engine oil fi lter per the engine manufacturer’s recommendations.
Refer to Engine Owner’s Manual for recommendations and other
maintenance items.
5. Service more often under dusty or dirty conditions.
and seal compromise
and seal compromise
For Dixie Chopper Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com