Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 95 / 136
3.5.1.1 MULTI GRAPH
With this function it is possible to display more than one graph per time. Proceed as usual to fill in the
different field, push “Next Device” button. The actual form is been resetted. The user can pick up to 5
different controllers. On the top right corner there is a counter, here is displayed the graph number.
3.5.2 DISPLAY THE GRAPHS WITH LOCAL PC
You can also display the graphs without connecting to a remote XWEB 3000. First you need to save
locally a graph(s) (see chapter 3.5.1 Display the graphs with xweb 3000 “Save a graph format”
section). If this is the first time you want to display a graph locally, you have to install a special
software. Insert the XWEB 3000 cd-rom and go to “Utilities” section. Here install “Graph viewer”.
First confirm the setup path and push “Start”.
At the end of the procedure this window will appear:
From now on you can find the program “Dixell’s graphs viewer” inside your PC start menu: