Instruction manual

XWEB 3000 – rel.1.7–
94/136 1592010600
This function provides to save the data of the displayed graph into the hard disk of the client
computer connected to XWEB 3000.
To start the operation select “Save” from the “Tools” menu.
After that you can proceed by using the typical saving method of Windows operative system,
remember to assign a proper name and origin of the data.
• Load a saved graph
This function loads the data of a graph that was previously saved into the hard disk of the client
PC. To start the operation select “Load” from the “Tools” menu.
After that you can proceed by using the typical opening method of Windows operative system,
select the proper name.
• Print a graph
To print a graph on the printer of the client PC or on another net printer, select “Print” from the
“Tools” menu, the follow the typical Windows structure.
• The background colour of the graph
The background colour of the graph changes depending on the status of functioning of the system
in that period of time recording.
White background, for instance, defines a normal period of functioning and data recording.
Green background means instrument off
Grey background means instrument no-link (it does not communicate)
Rose Background means system recording stopped.
Check the assignment of the colour function under “Background” from the “Help” menu.
• How to highlight an area
It is possible to split the main area into 3 different horizontal sections. From File, choose “Measure
separator” and insert the high and low bound (this limits can be adjusted ±15% of the automatic Y
axis).