Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 93 / 136
To enhance the portion of a displayed graph click and keep pressed the left button of the mouse
on the hypothetical top-left corner of the area to zoom.
Than drag the mouse down to the low right corner to complete the window to zoom. If the selected
area have not the proper dimensions click one time outside the area itself to abort the zoom, then
repeat the operation to select the area to zoom.
Otherwise, if you click one time with the left button inside the selected area, immediately this area
will be zoomed to the borders of the graph.
• Back to the original size
To resize the graph to its original dimension select from the “Scale” menu the “Reset Size” option.
• Manual Scale
The first time the graph is displayed with an “auto scale” function defined by highest and lowest
peek and the whole interval time selected.
Do define a personal scale of the graph view select from the “Scale” menu the “Manual Size” item.
The next windows will show the X and Y scale limits that the user can adapt to his requirement.
• Graph Synchronism
When a instrument information are displayed into 2 or more
graphs, all the horizontal time axes are synchronised together.
By zooming only one of the graphs the result is that the other
are no more synchronised with the new time base.
To keep all the graph synchronised you can use the “Sync”
function from tools menu
Select it for each graph that has to be included into the
synchronism function, then zoom into one of them. You can
notice that all time axes are now synchronized.
• Graph info
The graph information area is immediately displayed with the graph itself.
If necessary move or drag it where it does not cover part of the interested area.
To close the information window click on its crossed button.
To make it appear again select “Legenda” from the “Tools” menu.
• Save a graph format