Instruction manual

XWEB 3000 – rel.1.7–
82/136 1592010600
• Setup colours, dimensions and size of the button
• Place this button on the layout
Each time the button will be pressed, the system will print a sheet with the runtime temperature. Not
only printouts but also e-mail or a fax can be the target of this feature.
Layout Submenu:
HH) START
It allows you to test your layout. Once you push this button the editor transform itself in the viewer. You
can have an overview of the layer with real data coming from the instruments you have selected.
II) STOP
This function interrupts the start function described above.
Window Submenu:
JJ) WINDOW NAME
Let you choose among the available layers.
3.4.4.2 LAYOUT VIEW
With this function the user can use the layout previously prepared via “Layout Editor”. Beware that
the final user can interact with the real application if you used “Global command” function (see the
above point P) )
Of course Java Virtual Machine is needed. Your browser helps you during the download
procedure. Quite probably the image you uploaded will not change frequently, so once they all are
in the browser’s cache next time the load time will be faster. According to this function please
check if your browser settings support cache. You can do this by clicking “Tools” menu, then
“Internet Options” general TAB.
3.4.5 GLOBAL COMMANDS FUNCTION
It allows you to place in the layer a command-button and use it to send command to a particular
instrument or to a range of them. We do not describe here again all the functions that are available
also in the layout.
3.4.5.1 GLOBAL EDIT
In the homepage, go to Devices and choose “Global Edit”.
Go to insert menu and choose “Global Command”:
Here select the proper category. Once you have
made your choice, the system loads up a new
window.
A summarizing window will appear: