Instruction manual

XWEB 3000 – rel.1.7–
78/136 1592010600
With the first drop down menu you can filter the instruments, with the second one you select
the instrument you want to show in the layer. A new windows will appear:
Name of the instrument.
You can check/uncheck
the name. It is also
possible to change:
BG= background colour
TX= text colour
SZ= font size
Analog values.
You can check/uncheck
the values or modify
them. It is also possible to
change:
BG= background colour
TX= text colour
SZ= font size
Digital Inputs.
You can check/uncheck
the values or modify
them. It is possible to let
them blink (if active) or to
change:
BKG= background colour
SZ= font size
Outputs.
You can check/uncheck
the values. It is possible
to use icon or animated
square. User can also
modify:
BKG= background colour
SZ= font size
In the output section if you choose “Icon” the system will show a small drawing with the following
meaning:
Example Table 3
Icon Description Value
coloured icon rounded with blue square
On
Gray icon
Off