Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 73 / 136
The parameter can be saved into the hard disk of the Client’s PC, reloaded and used for other
parameter programming.
With a displayed parameter list, click on “Save on File” from the “Action” menu.
Select the “Save” box to include the interested parameters.
Click on the “Save” button situated in the top right position.
Click on “Save All” button to save the complete list.
Some operative system installed into the Client PC can require to “Save” before proceeding.
From the next message box insert the name of the parameter map and then click on “Save”.
• To load a parameter map saved into your Client pc
Click on “Load from File” from the “Action” menu.
Use the find button to search among the files of the message box.
Click on find or insert the file name including the path. These system always proposes the last
folder used during the last saving.
Confirm the name of the file to load.
Click on “Upload” to proceed.
• To print the displayed map
Click on “Print” from the “Action” menu.
Use the message box to select the print properties.
Confirm the printing to proceed.