Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 69 / 136
• Send the commands to devices
From the run time page you are allowed to interact with the instruments by sending commands to
them.
The user is requested to select the instrument or the instruments to which the command has to be
sent. To do that click into the “Sel.” box to select the instrument.
On the right top side of the browser border will appear a Toolbar which contains the Commands
button and the possibility of selecting or deselecting all the instruments together.
To define the command to send click on “Commands” and immediately a choice list will appear.
For multiple selection of some or all instruments the available commands will be only the common
commands among the instrument selected.
Select the command and click on “Send” button. Before proceeding a message box will tell you
how many instruments are involved.