Instruction manual

XWEB 3000 – rel.1.7–
68/136 1592010600
!” in green colour.
Each device is represented by an horizontal row that includes as many rows as many information
are available from the instrument.
For each row, the blue bar contains the address and the instrument name followed by the typology
to which the instrument belongs to. At the end of the blue bar there is the command box “Sel”.
The second row of a main row contains the set-point and the analogue inputs like the probe
values or other peculiar information of the instrument read-outs such as the electrical
measurements of a net analyser.
The third row of a main row is divide in three parts: the first area contains the icon symbols of the
instrument status, the second area contains the icon symbols of the instrument outputs (relais)
and the third area shows the digital input status with their complete description.
The icons and the description coloured in light grey tonality represents the corresponding function
as not active.
The active status of a instrument function is represented with the corresponding blue icon.
More information about the icon function can be red, pointing the mouse arrow over a single icon,
on the left down corner of the browser border.
A brief resume can be found in Appendix C.
• Devices in alarm
In case of alarm event the corresponding instrument is signalled with the red blinking description.
Immediately also the message box, on the top of the browser bar, will indicate the alarm situation
with a red “Alarms” label.
Find the complete alarm description clicking on the row blue bar.
A pop up message box will appear, inside you will find the list of the actual alarms that also
includes the starting date of each event.