Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 67 / 136
3.4.1.1 PARAMETER AND SINGLE VIEW
From the single view window it is possible to switch to the parameter programming window and vice
versa. Simply press the corresponding button. Use the below images as reference.
3.4.2 RUN TIME
The run time function provides to display into a unique window many devices together. This is dynamic
page and the data showed are updated in real time (the period depends on the number of
instruments).
This page based on the modern Java programming language, therefore it is necessary to have
the Java Virtual Machine installed on the client PC.
Normally the JVM is already installed into the PC operative systems, (if not present see
Minimum requirements section in this manual) a warning message will propose you to use it.
Accept it, the software applet is guaranteed free from viruses.
• Start the Run Time
From the Home page select the “Run time”
from the “Devices” menu.
The first part is referred to the selection of
the Category of the devices installed in order
to save loading time, while the selection “All”
will show all the instruments.
After selecting the proper category, XWEB 3000 begins sending data to your PC. The first time
you load the RUN-TIME windows, you are requested to accept the start of JVM program. All
applets that use JVM are certified by Dixell. Please answer to the warning windows by clicking on
the “OK” button (the message text depends on the release of JVM and on operative system of the
PC)
Then the Run Time page will start to display the selected devices with their information.
If one or more instrument have an active alarm event, the message box will indicate the alarm
situation with a red “Alarms” label.
If whole situation of the instrument displayed is normal, the message box will show “Device(s) OK