Instruction manual

XWEB 3000 – rel.1.7–
66/136 1592010600
Remember that you are looking at a still page therefore the instrument information are loaded and
displayed then there is no more data coming from the server.The screen refresh with the new data
can be executed automatically by selecting the “Auto” box and decide the updating interval by
clicking into the time box on the right side. Click on “Update” button to update the window with
manual procedure.
• Change set point function
You can change on the fly the set point value by clicking inside the box:
A window will appear, asking you the new value, confirm the new set point clicking OK button.
• Commands
The last stripe of information contains the available commands for that instrument. Use them to
operate on the instrument. Take care of the operations you make with commands.
Click on the interested function button, after sending the command the information of the new
status will be automatically updated and displayed.
Beware that “Stand By” commands turn off the instruments.