Instruction manual

XWEB 3000 – rel.1.7–
60/136 1592010600
Take care of this advise and ask authorised personnel before trying any kind of setting.
You can find more complete information in Appendix A.
3.3.5.6 CLONE FUNCTION
This function is intended to let the user save a lot ot time during the first setup of the XWEB 3000.
By using “clone” button the system will broadcast the current instrument setup to all the other that are
compatible. The compatible instruments are only the ones who belong to the same model. In this
situation the user is requested to made only one setup, then using “clone” button in few seconds
(depending on the total number of instruments) the configuration will be applied to all the other
instruments.
In the first step you are required to made a complete setup regarding both standard and advanced
section. When you are ready, push “clone” buton.The system will propose you the following window. In
the upper part you can see information concerning the name of the instrument that the system will use
as base model .
In our example we have a model XJP60 whose name is NEW_XJP60. The user can decide to apply
standard settings or advanced or both of them in one step. Moreover it is also possible to change the
name of the instruments by clicking in the field “Name”.