Instruction manual

XWEB 3000 – rel.1.7–
58/136 1592010600
Make sure of having selected the right instrument under the “Selection” field.
Depending on the instrument model there are different available categories to define the attributes
of the instrument itself, If you do not find the right one maybe it is not defined or it is not available
for that instrument.
By itself XWEB 3000, after the recognising procedure, assigns the default categories (if you
checked the box in category window) to the devices connected to the RS 485.
To change the category click inside the field and select the appropriate item.
Click “Confirm” now or at the end of the whole configuration.
3.3.5.4 ASSIGN THE ALARM TYPOLOGY
Be sure of having selected the right instrument in the “Selection” field.
ALARM ORIGIN: depending on the instrument model there are different available alarms, if you
do not find the right one it means that it is not available for that instrument.
LABEL: each alarm can be assigned with an appropriate label defined by the user, this label is
also used when it is displayed by the system.
ALARM TIPOLOGY: links alarm type to the proper Alarm typology.
If you do not find the proper action in it, step back to the Alarms definition to insert the new
features into a new alarm typology.
THIS FOR ALL DEVICES: by clicking this button you can set all the instrument with the new
alarm values. The alarm configuration obtained is repeated for all the instruments having these
compatible fields.
SND (Send): when enabled the alarm is treated also to be sent.
REC (Recording): when enabled the corresponding alarm is logged.
Click “Confirm” now or at the end of the whole configuration.