Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 57 / 136
xxx_New_Model” where:
• xxx represents the serial address of the recognising procedure (Adr parameter);
• “New” means that the name is still unassigned;
• “Model” define the instrument model.
Instead of the string “xxx_New_Model” the user can insert the new appropriate name of that
instrument.
3.3.5.2 ASSIGN THE DEVICE NAME
After selecting the controller’s name, click into the “Name” (Repl_XR170C in the image above).
Insert the new name such as “Frozen food_001”.
Click on “Confirm”.
3.3.5.3 ASSIGN THE CATEGORY TO THE DEVICE “DEVICE CATEGORY SETUP”