Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 49 / 136
The following window will appear:
Fill in “Activation Time” and choose a mark colour. Press confirm.
D) EDIT CLASS
Use this menu to modify an existing class.
choose the class you want to modify then press “Edit”. If you want to delete a class, choose it and
press “Delete”.
Event submenu:
E) ADD EVENT
To add an event to an existing class.
Choose a class then select a command. Fill in “Activation Time”. Choose a marker and its colour.
Push “Confirm” to add this event to the Scheduler.
F) ADD PRINTING EVENT
The system loads the same menu already discussed at point D).