Instruction manual

XWEB 3000 – rel.1.7–
40/136 1592010600
From the “Selection” menu find the appropriate item.
Then select from the “Time Band” the appropriate time.
Click into “ Hour (hh:mm)” and then insert the new hour and minutes
Click on “Modify”.
3.3.2.7 ENERGY SAVING COMMAND (FOR INSTRUMENTS PROVIDED WITH THE FUNCTION)
It defines the time
table to turn into or
out the Energy
Saving regulation
setpoint. The user is
allowed to define the
hour and minutes of
each single event
for yearly, monthly
and also for daily
use.Then the
instruments will be
combined with the
appropriate list of
Energy Saving
events.
Eg: define a “Night time” list that corresponds to: 20:00 Energy saving ON and 08:00 Energy saving OFF,
excluding Sundays and public holidays.
• To insert a new item
Click into the field “Name” and insert the word or the words that more represents the application;
The most common category should be set as “Default” by clicking into its box; It helps to save time
for most part of the instruments.
Click on “Insert”.
• To modify an existing item
Select the item from the “Selection” list;
Change the “Name” description;
Click the “ Default ” if necessary;
Click on “Modify”. Wait the screen refresh.
• To delete one of the item of the list
Select the item from the “Selection” list;
Click on “Cancel”;
Confirm the operation if necessary. Wait the screen refresh.
• To reset all the items of the list
Click on “new”;
Wait the screen refresh.
• To delete all the items of the list
Click on “Cancel All”;
Confirm the operation if necessary. Wait the screen refresh.
• How to program the list of the Energy Saving events
Click into “ Hour (hh:mm)” and then insert the hour and the minutes: then select “ON” or “OFF” to
start or stop the Energy Saving in that time.
Select the Calendar function if you need to schedule the events by calendar filtering.
If no Calendar function selected the operation is daily repeated.
Click on “Insert” to add the new event.
Repeat the procedure to fill the list of the daily events.
• To change the time of the event
From the “Selection” menu find the appropriate item.
Then select from the “Time Band” the appropriate time.
Click into “ Hour (hh:mm)” and then insert the new hour and minutes
Click on “Modify”.