Instruction manual

XWEB 3000 – rel.1.7–
34/136 1592010600
The Device Find page will display the following search parameters:
• Devices Class is the kind of device to find, select “Dixell Devices” for Dixell instruments
When included, the other classes will represent the instruments of other companies;
• Address Range defines the address range of the research eg: from 1 to.10 means that the
research starts with 1 and finishes at 10;
• Address List to find some specific addresses eg: 2, 4,34 means that the unit research only those
addresses.
After finishing click on GO button and wait for the result.
Check the total number of found instruments and compare it with the number you are expecting.
If the list does not contain one ore more expected instruments try the procedure again or try to limit the
search only to the missing address values.
Confirm the list of found devices by checking “Operation” field and pushing on Add/Replace
button . You are ready to configure the next sections of the web server.
3.3.2 CATEGORIES
This function allows defining the functioning attributes and the working features to be associated to the
instruments themselves. The user is required to preventively decide the list of these features.
Lately, when working with the Device configuration, each device can be easily configured with these
appropriate attributes.
Some categories can be defined also with “Default”. In this case the category is initially proposed as
default during the instrument configuration.
To save time and make easier the configuration procedure the parameters of the category system can
be saved and lately reloaded for any other use with the same or another server.