Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 27 / 136
2.2.4.11 XCENTER
The centralized alarm management software, automatically enables XWEB3000 to be part of the
monitored network. The user later can disable the alarm sending to the XCenter or by means of the
alarm menu he can adjust the sending procedure using the different levels of alarms available
(warning: delay and accumulation time will be considered as usual).
2.2.4.12 REBOOTING
Now you are at the end of the procedure, a summarising windows will appear. Check if all values are
correct then click-on “confirm”. At this point the system is going to restart. You may need to wait for
few minutes to be able to log-in again.