Instruction manual

XWEB 3000 – rel.1.7–
24/136 1592010600
2.2.4.6 MODEM
Next window allows you to setup the modem connection. XWEB 3000 uses the modem to send faxes
and in same cases also e-mails. In the first case the unit itself can send a fax, while in the second
case you may need to setup a dial-up connection (next step). Please remember that only modems
approved by Dixell can be used. You can get more information and ordering codes reading
APPENDIX E.
2.2.4.6.1 XWEB MODEM
When XWEB modem is in use, it is important to choose the country according to the real country
where XWEB 3000 is installed. From the drop down menu “Serial Modem”, choose your model
(internal or external one). As soon as the user selects the XWEB modem, the country drop down
menu is enabled. Please choose you country to avoid modem malfunctioning. If your country is not
available in the supported list, please contact Dixell.