Instruction manual

XWEB 3000 – rel.1.7–
1592010600 Pag. 117 / 136
3.8 INFORMATION MENU
In this menu you can find all the web pages that allow the final user to interact with XWEB 3000
update procedure. Moreover the user can check the system release.
3.8.1 SYSTEM RELEASE
To check the system software release, go to “Information” roll-down menu and choose “About”:
This window will appear:
System release is the number after the letter “V”. In the above image is displayed XWEB 3000 v.2.0
3.8.2 SYSTEM UPDATE
One of the most important features of XWEB 3000 is the possibility to update the system via internet
(network access or dial-up). Update procedure is divided into 2 main steps. First step makes an
internet connection and tries to reach a remote host to begin the download of the new data. Of course
the very first action is to compare local XWEB 3000 system release to the one available on the remote
host. If every modules are the same on both side, no download starts. On the contrary only the module
needed is download. The second step is a completely automatic local procedure that update the
software. Beware if a power loss occurs during this procedure, the system may fault to re-start.
To start the update procedure please go to “Information” roll-down menù and choose “Update”.
This window will appear, of course push “Yes” button to start the procedure.