Instruction manual

XWEB 3000 – rel.1.7–
114/136 1592010600
After restoring, the system will be rebooted.
3.7.2 SYSTEM MESSAGGES
XWEB 3000 is able to send a complete report of the past activity. The report can be sent both
automatically and manually according to an event calendar defined by the user (see Scheduler §).
Moreover if the system is working out of the standard operative range (i.e. cpu temperature),
automatically a report will be sent out.
This tool can also be used when the user wants to test the system setup, in fact it is possible to test for
example the e-mail: XWEB 3000 will send an e-mail to the selected receiver.
Enable system notification: enable/disable reporting activity
Enable alarm relay: enable/disable alarm relay when an alarm occurs (high temperature, a faulty
RS485 hardware and blackout)
3.7.2.1 MANUAL TEST: E-MAIL, FAX OR SMS SENDING
Select the user in the “Receiver’s Index Book”, then select the message type you want to receive. The
calendar option let you choose whether to filter the messages according to the calendar (see
§3.3.2.9Calendar function) or not. By pressing “Send message” the system tries to send the message.
3.7.2.2 SENDING AUTOMATIC REPORTS
It is possible to receive an automatic report according to the user needs. Go to “Configuration” then
“Scheduler”. Choose “Event” and finally “Add system event”. The following window will appear: