Instruction manual

XWEB 3000 – rel.1.7–
108/136 1592010600
3.7 TOOLS MENU
In this menu it is possible to use special tools intended for system maintenance. Back-up let the user
store in a safe place XWEB 3000 setup and its recorded data. System message tool sends a complete
report of the past activity of the server and if the operative working limits are exceeded the report is
sent automatically.
3.7.1 BACKUP – RESTORE
This procedure allows the user to make a data back-up and restore it in case of need. The majority of
USB external storing devices are supported (USB pen-drives memory as far as USB external hard-
disks). It is also possible to back-up the data inside the hard-disk of XWEB 3000 or even to the client
PC hard-disk.
The restore procedure overwrites the current data inside the XWEB 3000. This means that restoring a
back-up will revert the XWEB 3000 to the status saved inside the restore files. It is possible to back-up
all the user’s information and setup as well as the main graphs recorded values.
Warning: the mass storage USB device must be plugged only for the necessary time to complete the
backup-restore procedure, then it must be unplugged.
3.7.1.1 BACKUP
To start a backup the system must be stopped. Use “Tools” menu, then “Back-up”.
Check the available options and choose a media type. It is possible to select the internal hard disk of
XWEB 3000 or a compatible USB external device. The majority of USB external hard-disks are
supported, too. If you choose “Download” all the information will be stored in your hard-disk, this
means that if you checked “Main Graph Data” a standard modem connection is really to slow to
download the entire database. Intranet connection is the only solution for this kind of download. Once
you have to select the media type, push next. This window will appear: