Instruction manual

XWEB 3000 – rel.1.3–
In the next step you have to configure e-mail.
2.2.1.7 E-MAIL CONFIGURATION
One of the most versatile way to communicate alarms to the outside world is using e-mail services.
Nowadays e-mail messaging system is a world wide way of communicating and sharing information
between people. XWEB 3000 can handles e-mail, but to send them you need to make a proper setup
of the unit. There are 2 different routes that XWEB can uses. The first way, if it is present, is using
intranet/lan connectivity. This means that a SMTP server must exist and XWEB have to reach this
server through the lan. In this case gateway and DNS parameters are mandatory in “Network
Configuration” window. The second method is used when there is no direct lan access to internet. In
this case a modem is needed, XWEB 3000 will contact directly your ISP provider and using its
services will send all the e-mails.
To send e-mail you need a valid SMTP server. Usually your lan administrator will provide you a server
name, for example dixell.com (another format widely used is mail.your-company-name.com), then a
valid e-mail address is needed. We strongly suggest you to create a new e-mail account to use with
XWEB. In this case, e-mail header will be something like this: [e-mail]. This
is very useful to apply e-mail filtering in the client PC. Is not necessary to have a dedicated mail
account to use e-mail services, but is strongly recommended because for example many SMTP
servers need user account authentication (especially ISP) and in this case without a proper user you
can not send e-mails.
2.2.1.8 SMS CONFIGURATION
1592010600 Pag. 19 / 111
To be able to send SMS messages the user must complete an on-line form. We strongly suggest to
visit the following link: http://www.netech.it/ir_smsalert
before proceeding to the unit setup.