Installation manual

1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28 40/100
Fill in "Class Name" and select a type of device. Select all tools to be associated with the operations of the
device class. For example, to send a command to the devices or to run other types of operations as
described below.
 Creation/setting of command events to devices
To send timed commands, access the menu EventsAdd Event to create a new event. Each event
corresponds to the sending of a command on the controller network to one or more devices.
Choose a command from those available (the system only displays commands common to all selected
tools). Fill in the "Activation Time" value with the desired send time, select a marker and its colour. Press
"Confirm" to add this event to the scheduler.
 Creation/setting of report events
To create a timed report, access the menu EventsAdd Printing Event to create a new event. The event
reports are normally used as HACCP automatic reports. Each event corresponds to the creation of a report
and to its sending through means of one of the system configured media (printer, fax, email).
The report is created starting with the selected variables; select them one at a time or use the quick selection
filter (Fast Selection).