Installation manual

1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28 20/100
It is also possible to assign the devices to the groups directly using the "Device Find" procedure.
D. RESOURCE CONFIGURATION OF DEVICES
It is possible, for the devices already added to the controller network configuration, to customise their
resources. For example, the variable name as well as other features. Select the "Device Resources" tab to
access this feature.
 Customisation of device name.
 Enable Device
No: by enabling this option, XWEB not query the device and therefore no value from the device is displayed.
This option is useful when you want to create pre-device configurations but will not fit them to keep them in a
real network context.
Yes, not logging in OFF mode: by enabling this option, XWEB interrogates the device. In the event that the
device is in ON displays the data in real time keeping them stored in the historical archives. In periods when
the device is OFF, the device data are not available.
Yes, not logging in OFF mode: by enabling this option, XWEB interrogates the device. Both in the case
that the device is in the ON or OFF displays the data in real time keeping them stored in the historical
archives. This option is useful in case the tool should be used as a 'probe'; the data read from the
instruments in OFF are not always valid and should be checked with Dixell on what tools to use this function.
 Main Sampling (mm:ss)
Registration time of main history data. This time represents the maximum resolution of each sample, after
the two days of sampling.
 No-Link timeout
Time after which the system detects the condition of the disconnected device.
 XWEB Clock-Sync
Enable the XWEB in order to synchronise the instrument clock. This option is only available for devices with
RTC. The update operation is automatically run by the system on a regular basis.
 Customisation description of variables and of the unit of measure
1. Select the variable of which you wish to change the description. The string can be edited by typing in
the "Custom name" or "Unit" column.
 Registration in threshold main data (Red.Edge) and not sampling (only for digital type variables).
This function allows you to keep the thresholds unaltered, even below the sampling times for the main
data for the variables selected, in order to allow for the detailed graphical representation of the same
variables, even after two days. To enable the function, tick the box relating to the variable in the "Sodsc"
column. Attention: the enabling of this function can also drastically reduce the overall memory of the
XWEB history. Only enable this function for short periods of a few days.