Installation guide

XWEB SERIES Installation Guide
04/11/2004 1592017000 Pg. 67/74
Ask your provider for more details about the rent of a the static IP.
This the internet system requirements for the best result:
Wide band connection.
At least 1 static IP addresses for the XWEB 3000.
The internet connection is established through a device called
Router that receives and sends the data as interface between an
Intranet and Internet. The Provider also assigns the address of the
router that is called IP WAN.
Remember that the default value of the IP of the XWEB 3000 is:
192.168.0.200.
Depending on the contract the Provider can also supply the router,
otherwise the user can buy it separately.
REMEMBER: ask qualified personnel for the router installation by
using this information.
Used ports that are mapped to the LAN side:
80 (used for the http:// access)
22 (used for SSH connection)
443 (used for SSL protected connection)
10000 (used for the internal modules of the system)
The above ports are all related to the XWEB 3000 IP address
192.168.0.200.
While the ports on the WAN side are:
Telnet (to configure the router from a remote, also via Internet)
http (To access the XWEB 3000)
If working with the router GATEWAY and DNS check your Internet
contract details.