Installation guide

XWEB SERIES Installation Guide
Pg. 66/74 1592017000 04/11/2004
6 Intranet / ethernet connection
The Intranet or Ethernet connection should be initially managed by
the net administrator which will assign one free IP address to reach
the Server. This number is an example of what you should expect:
http://192.168.000.111.
After receiving the address from your network Administrator the
XWEB 3000 must be set with this number.
REMEMBER: A setup wizard will guide you through the procedure.
Please ensure you have an IP address to use in network section.
Use a standard RJ45 network cable to connect the unit to your lan.
The Intranet method allows the connection to interact with XWEB
3000 from all the PC Clients. Insert the net address assigned by the
administrator into the Browser address bar. Bookmark the address
with personalised name for the future connections.
Internet connection
It is necessary a STATIC IP address for the XWEB 3000 which is
normally assigned by the Provider of your internet services (ISP).
The Internet connection allows XWEB 3000 to be reached from all
PC-clients. Insert the net address assigned by the administrator into
the Browser address bar. Bookmark the address with personalised
name for the future connections.