Installation guide

XWEB SERIES Installation Guide
Pg. 10/74 1592017000 04/11/2004
4 Local connection with monitor, mouse
and keyboard
On the back side, the XWEB 3000 is provided with the sockets for a
monitor, a mouse and a keyboard. Please connect all the
peripherals before powering-on the unit otherwise the system may
fails to recognise them. This means that , for example, if you do not
plug the monitor cable now, you won’t see anything displayed on it
later.
The unit can also work without these three elements therefore if the
user intend to work just with the remote, he can definitively remove
them after the setup operations. In any case inside XWEB 3000 is
loaded a standard browser to allow the user setting up the unit.
If necessary check the instructions manual of each device
connected to the unit.
The operative procedure to work with XWEB 3000 is the same for
all connection method.